PURPOSE:
The machine frame has “Direct Force” design where Y-axis is located on the machine bed and X-axis (work table) is located on top of the Y-axis. This design provides good structural rigidity for small-size machines. The machines feature a machining accuracy of ±3.5 μm, best roughness of machining surface Ra 0.35 µm (with the S Power Module). In the standard version all axes are driven by AC servo motors connected directly to the ball screws. The machine has a closed loop control via linear optical scales with 0.2 μm resolution to the servo drives. Optionally, X and Y axes can be equipped with linear drives. The GE series machine is equipped with a wing-type tank door, while GA series has a sliding-down door that requires less production floor area.
FEATURES
| Parameters | Unit |
GE-43A / GA-43 |
GE-53A / GA-53 |
| Cutting precision | μm |
±3.5 |
|
| Max. workpiece size | mm |
830 x 630 x 215 |
|
| Max. workpiece weight | kg |
400 |
500 |
| XY-axes travel | mm |
400 х 300 |
500 x 300 |
| Z-axis travel | mm |
220 |
|
| UV-axes travel | mm |
60 х 60 |
|
| Best surface roughness (Ra) | μm |
0.6 (0.35 — option) |
|
| Applicable wire diameter range | mm |
0.15 ~ 0.3 |
|
| Water tank | l |
708 |
|
| Min. value of step setting | mm |
0.1 |
|
| Machine size | mm |
2200 x 2400 x 1990 |
|
| Machine weight | kg |
2770 |
2850 |
Headquaters: Werkstr. 20, 71384 Weinstadt, Germany
Production und Sales: Gutenbergstr. 2, 63456 Hanau, Germany
Working Hours: Monday – Friday from 09:00 to 18:00
+49 7151 20522580
info@ageltech.de